Search published articles


Showing 3 results for Mousavi

Dr. Davood Fereidooni, Dr. Sajeddin Mousavi, Dr. Esmaeil Najafi, Dr. Gholam Reza Khanlari,
Volume 16, Issue 4 (Winter 2022)
Abstract

Assessing and understanding the hydromorphological characteristics are necessary to understand the behavior of a river and its active processes. This is useful for understanding the erosion and sedimentation regime and changing the river path, for making correct engineering and human activities in the river's catchment area. The Gian River, with an average annual discharge of 2.3 m3/s, is one of the tributaries of the Gamasiab River in the Hamedan province. From a geological and hydrogeomorphological point of view, the Gian is a small river. It is fully compatible with the geological structures of the region. The calculation of the sinusoidal coefficient has shown that this river is a meandering river whose wavelength, the amplitude of the oscillation and the width of the meander belt are smaller in the mountainous area than in the plain area The gradient of the river bed is relatively low and it is classified as an erosion and sedimentation river in its different sections. The Gian River has a rocky bed in the mountainous part and an alluvial bed in the plain. The Gian River has a small catchment area, and, according to theGravelius' coefficient, its shape is almost elongated. The catchment elevation of the Gian River is between 1455 and 2700 with a weighted average of 1715.20 m.a.s.l. and its area decreases with the increase in the elevation. The concentration time of the catchment is 4.204 hours. The application of the data and results of the research can be very effective in land use planning, engineering and executive applications to predict river changes and protect engineering structures such as roads, bridges, coastal structures and railways, protect agricultural lands in the region and develop tourism.
 

Seyyed Mahmoud Fatemi Aghda, Seyyed Sara Mousavi Herati, Mehdi Talkhablo, Amir Maziar Raeis Ghasemi,
Volume 18, Issue 2 (Summer 2024)
Abstract

The alkali-silica reaction of aggregates is one of the most significant factors in the destruction of concrete structures worldwide. This is due to chemical reactions between alkaline fluids in concrete voids and active silica minerals present in some aggregates. Considering that many physical, chemical and mechanical properties of concrete are related to aggregates, the role of aggregates in concrete is crucial. This research aims to investigate the compatibility of aggregate petrographic studies and accelerated prismatic mortar testing in predicting the reactivity of aggregates and determining the intensity of aggregate reactivity using the DRI index (a semi-quantitative complementary petrographic analysis). The study was carried out on laboratory samples of aggregates from mines around Tehran, using the ASTM C295, ASTM C1260 and ASTM C856-4 tests. The results showed that pyroclastic aggregates, which include sandy tuff, crystalline tuff (dacitic andesite) and glassy tuff, have the potential to cause an alkali-silica reaction due to their glassy background and microcrystalline silica. During the alkaline reaction tests of the aggregates, evidence of gel was found in cracks, holes and cement paste. In addition, the DRI index showed that the fine aggregates of both study areas were in the "slightly damaged" category and the coarse aggregates were in the "severely damaged" category.

Younes Mousavi, Mohammad Nakhaei, Gholamhossein Karami,
Volume 19, Issue 4 (Winter 2025)
Abstract

Planning the management and optimized consumption of groundwater resources is a critical infrastructural necessity, as these resources supply a significant portion of the country's drinking water. A key component of this planning is accurately calculating the water balance, which requires determining the aquifer's hydrodynamic parameters, including transmissivity (T) and hydraulic conductivity (K). This study calculated these parameters using step-drawdown pumping test data from a single-well system across various locations in the 411-square-kilometer Hashtgerd Plain aquifer (an unconfined aquifer) with AquiferWin32 software. The results indicate that transmissivity is distributed unevenly across the plain. The lowest transmissivity values were observed in the southern (Kourosh Town) and southwestern (Najmabad) sectors, while the highest values were associated with the Kordan alluvial fan and its downstream lands. Based on these findings, maximum transmissivity was estimated at 3,682 square meters per day, with an average of 440 square meters per day. Hydraulic conductivity was determined by integrating saturated thickness data from geoelectrical studies with the previously calculated transmissivity values. The final results showed that hydraulic conductivity ranges from a minimum of 0.2 meters per day in the southern regions to a maximum of 9.7 meters per day in the central aquifer.



Page 1 from 1     

© 2026 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb