Search published articles


Showing 3 results for Hafezimoghadas

Ramezan Ramezani Omali, Mehdi Saeidian, Naser Hafezimoghadas,
Volume 9, Issue 1 (6-2015)
Abstract

Determination of Faults activity rate is among the most important parameters of evaluating faulting hazards. In this paper, active faults on region of Shahid Rajai dam of Sari with radius 100 km based on fractal dimension of faulting and earthquake as well as evaluation of slip rate were classified and those Activity rate were assessed. In order to determine of fractal dimension of faulting and earthquake, Box-counting method was used. For estimate of slip rate beginning the seismicity parameters (a&b) of study area was estimation. Then these parameters were normalized for each fault. Based on the existing relationships and having a&b for each fault, the seismic moment of fault was calculated. Finally according to extant relations for evaluation of seismic moment rate, slip rate of each fault was determined and the faults of study area were classified accordingly. By grading based on fractal dimensions, the faults of North- Alborz, Damghan and Garmsar have been the most active faults in the study area during the last 100 years and according to evaluations of active rate of faulting and earthquake based on fractal dimensions, generally set in category BD and their activity approved. The faults with very low slip rate and with long return period of earthquake, are possible causes of occurrence large earthquakes (856 AD) Gomes and inducement fault namely Damghan Fault is an example of these faults. The faults of Astaneh, Rameh and Cheshmeh-ali have been low slip rate and thereupon be able to develop high seismic moment rate. According to earthquake events in privacy of New faults introduced (Khorram-abad, Majid,…), the high activity rate of these faults seem logical
Iman Aghamolaie, Gholamreza Lashkaripour, Mohammads Ghfoori, Naser Hafezimoghadas,
Volume 13, Issue 1 (Vol. 13, No. 1 2019)
Abstract

Introduction
The problematic collapsible soils are deposits with wind origin that constitute about 10% of the total area of ​​the earth. Several countries, including China, Russia, the United States, France, Germany, New Zealand, and Argentina have vast areas of collapsible soils. These deposits usually form a semi-stable honeycomb structure and are highly susceptible to sudden changes in the volume reduction due to becoming humid. Collapsibility and other related issues such as different subsidences, land cracks and landfalls seriously damage the infrastructures constructed on these soils.
 By the growing rate of urbanization in different parts of the world, the probability of construction on these soils and consequently water availability for these soils will increase; as a result, humidity increases and the collapse of these soils may occur. Therefore, studying the behavior of these types of soils is very important. Over the past six decades, many researchers have studied the collapse mechanism of collapsible soils due to becoming humid. Discussions on this subject are summarized in three categories: traditional methods, soil structure studies, and soil mechanics-based methods. In the present work, collapsibility and its controlling factors in the soils of Kerman city are investigated.
 
Material and methods
To determine engineering properties of Kerman deposits in this research, the geotechnical information was gathered and 50 core samples were extracted from different parts of the city. The sampling points were selected such that they could have a high overlap. X-ray diffraction (XRD) was applied to determine the mineral type and soil structures while scanning electron microscopy (SEM) was used to study grain arrangement.
Results and discussion
Geotechnical characteristics of the samples collected from Kerman plain deposits include their physical and mechanical properties. Based on the obtained results, this fine-grained sediment generally includes two CL and CL-ML groups. The mineralogy studies of Kerman city soils show that the minerals in these deposits are mainly illite, chlorite, illite-smectite, calcite, quartz, and gypsum. In order to study the collapsibility level of the soils in Kerman through the field studies, samples were taken from different parts of the city and the tests were carried out to determine the physical properties, collapsibility index, and structural studies. Through the SEM analyses, samples related to Haft Bagh area, Motahhari Town, and Pedar Town revealed an open structure and intergranular pores and thus a high level of collapsibility. On the other hand, in the majority of samples taken from the central part of the city, such as Esteghlal Street, Azadi Square, Bahmaniyar Street, and Hafez Street, the soil aggregates generally have corner-to-corner connectivity, with no specific order in their structure, and the arrangement of the particles is random and irregular. The orientation of the particles mostly shows no sharp pattern. In addition to soil particles, they have shown random and disorientated cavities with small sizes, suggesting the density and compactness of the soil indicating a low to moderate collapsibility. In some areas (e.g., Pedar Township and Motahhari Township), crystalline salt and gypsum crystals are clearly seen. It is expected that by increasing the amount of water, these salts dissolve and their effects can be observed as dissolution cavities.
 The dissolution of soluble crystals can also reduce the strength of the soil structure and ultimately lead to soil degradation. Calcite crystals are also found in some places in the form of calcite cement among the grains, sometimes as single crystals, and sometimes as lime nodules within the soils of Kerman city. Among the stated criteria in this research, Denisov, Holtz, and Hill criteria, the Russian regulations and ASTM standards were employed to assess the potential of the studied soil collapsing. Based on the criterion of the construction regulations of Russia, it was found that the deposits of the city of Kerman are mainly collapsible (L>-0.1).                     
Moreover, based on the Denisov criterion (if e/eL>1.5 the soil is non-collapsible, if it is between 0.75 and 1.5, the soil is prone to collapsing, and if it is between 0.5 and 0.75, the soil is severely collapsible), soils of Kerman are within the range of collapse-prone soils. Finally, based on the ASTM criterion, in some areas of the city like Motahhari Town, Pedar Town, and Haft bagh, soils show a high collapsibility. In comparison, in the central parts of the city, the values of this criterion vary between 0.15 and 11, suggesting the presence of soils with a moderate collapsibility. Comparing the results obtained using these criteria it is seen that areas with a collapsible behavior are relatively similar collapsibility results are obtained.
Conclusion
Based on the achieved results, fine-grained sediments of Kerman city are mainly composed of CL and CL-ML groups. Mineralogy results indicate that the minerals in these deposits are mainly illite, chlorite, illite-smectite, calcite, quartz, and gypsum. SEM results for the central part of Kerman city confirm the compressed and densely compact form of soil particles. The results obtained, using the construction regulations of Russia show that the soils in the study area are collapsible. According to the Denisov criterion, they were found to be prone to collapse. Finally, based on the ASTM results for the central parts of the city, soils exhibit a low to moderate collapsibility. However, in some areas of the city, such as Motahhari and Haft bagh, soils show a complete collapsibility behavior../files/site1/files/131/1Extended_Abstract.pdf
 
Mohammadkazem Amiri, Gholam Reza Lashkaripur, Siavash Ghabezloo, Naser Hafezimoghadas, Mojtaba Heidaritajri,
Volume 14, Issue 3 (11-2020)
Abstract

Introduction
CO2 injection in deep geological formations, such as depleted oil and gas reservoirs, in addition to the environmental benefits, is one of the effective method for enhanced oil recovery (EOR) as tertiary EOR. Presence of reservoirs with a pressure drop which require injection of gas in the southwest of Iran and having the technical and environmental effects of CO2 injection have created a huge potential for CO2 injection to EOR in this region. In the first step, to perform CO2-EOR, the geomechanical assessment is needed to find out pore pressure, in-situ stress magnitudes and orientations and fractures and faults conditions. In this paper, the initial in-situ pore pressure is predicted using modified Eaton method for 47 wells in the length of the study field and calibrated using repeat formation test and mud pressure data. In-situ stress was obtained by the poroelastic method for 47 wells in the length of the study field and calibrated using leak off test and extended leak off test. Then, the orientation of in-situ stresses is obtained based on image logs. Hydraulical and mechanical activities of fractures and faults were performed by critically-stressed-fault hypothesis
Material and Methods
In this paper, the initial pore pressure is calculated using modified Eaton method and other corrections that are proposed by Azadpour et al. (2015). The estimated initial pore pressure is validated using mud weight pressure (Pmw) and repeat formation tester (RFT) data. In-situ stresses are composed of three orthogonal principal stresses, vertical stress (SV), maximum horizontal stress (SH), and minimum horizontal stress (Sh) with specific magnitude and orientations. The magnitude of SV is calculated by integration of rock densities from the surface to the depth of interest. The poroelastic horizontal strain model is used to determine the magnitudes of the SH and Sh. Then, the estimated minimum horizontal stress from poroelastic horizontal strain model is validated against direct measurements of LOT and XLOT tests. The orientation of breakouts was determined based on compressively stressed zones observed in the UBI log and using Caliper and Bit Size (BS) logs. The hole elongates perpendicular to the SH and breakouts develop at the azimuth of Sh. Fractures and faults reactivation analyses are very important, they can potentially propagate upwards into the lower caprock and further through the upper caprock due to CO2 injection. Fractures and faults identification were performed based on image logs. Based on performed seismic interpretations by NISOC (National Iranian South Oil Company), 15 faults have been detected in the field. Fractures and faults conductivity and activity in the current stress filed affect on fluid flow and mechanical stability or instability of the CO2 injection site. Critically stressed fault hypothesis, introduced by Barton et al. (1995), states that in a formation with fractures and faults at different angles to the current stress field, the conductivity of fluids through their apertures are controlled by the interplay of principal stress orientations and fracture or fault directions. Hence, conductive and critically stressed fractures and faults in the current stress field were evaluated using critically stressed fault hypothesis. Fractures and faults are plotted in normalized 3D Mohr diagrams (normalized by the vertical stress), therefore conductive and critically stressed fractures and faults were determined.
Results and discussions
The maximum distribution of initial pore pressure was 20-25 MPa in the field and the average of initial pore pressure was 25 MPa in the field. Unlike the World Stress Map, the stress regime is normal in the reservoir. Because the Kazeroon fault and Dezful Embayment act as a strike-slip tensional basin, resulting in the subsidence of Dezful compared with other regions. The frequency distribution of calculated in-situ stress in 47 studied wells in the length of the field has been presented. The maximum frequency distribution of SV, SH and Sh were between 60-70, 50-60 and 30-40 MPa, respectively. A large amount of fracturing is observed in 20-25 m below the caprock. Based on the continuity of their low amplitude traces on the acoustic amplitude image of UBI, fractures are classified into 4 classes: discontinuous-open, continuous-open, possible-open and closed fractures. OBMI and UBI image logs processing were performed in 7 wells. As can be seen from the image log, and caliper analysis the most dominant strike of SH around the well is 27 and Sh strike is 117◦. These have two dominant orientation, some faults are along the strike of the Zagros fold-thrust belt (NW-SE) and the others are perpendicular to the Zagros fold-thrust belt strike (NE-SW).
Based on the normalized 3D Mohr diagrams it is clear that the fractures and faults that are oriented to the SH will be the most permeable, because the faults and fractures experience the least amount of stresses in the direction of SH and they have minimum resistance to flow in this direction, therefore will have relatively high permeability. Also, results showed the faults number 15, 6, 10 and 2 will be the most dangerous faults during CO2 injection.
 
 

Page 1 from 1     

© 2024 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb