Volume 12, Issue 5 (English article specials 2018)
2018, 12(5): 189-212 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Sharifi M, meftahi M, Naeini S A. Influence of waste tire chips on steady state behavior of sand. Journal of Engineering Geology 2018; 12 (5) :189-212
URL: http://jeg.khu.ac.ir/article-1-2632-en.html
URL: http://jeg.khu.ac.ir/article-1-2632-en.html
1- Department of Civil Engineering, Imam Khomeini international university
2- Department of Civil Engineering, Imam Khomeini international university ,Naeini.hasan@yahoo.com
2- Department of Civil Engineering, Imam Khomeini international university ,
Abstract: (6649 Views)
Materials such as waste tire chips were widely used to improve the strength of soil. The objective of this study is to discuss the residual strength or steady-state behavior of sand-waste tire chip mixtures. A series of undrained monotonic triaxial compression tests were conducted on reconstituted saturated specimens of sand and sand-tire chip mixtures with variation in the tire-chip contents from 0 to 4 percentages by dry weight of soil. The specimens are prepared using dry deposition method of preparation. The influence on residual resistance of varying confining pressure (100, 200, and 300 kPa) and sand mixture relative density (40, 65, and 80%) were evaluated. Tests results showed that by increasing the tire chip contents, the residual strength increased and steady-state lines move to the right of log Sus-e diagram. Also, the residual resistance improvement induced by tire chip inclusions was found to be sensitive to the relative density of samples and applied confining pressure.
Keywords: Steady-state strength, Waste tire chips, triaxial test, Sand, Relative density, Confining pressure.
Type of Study: Original Research |
Subject:
Geotecnic
Received: 2017/04/3 | Accepted: 2017/10/17 | Published: 2018/12/25
Received: 2017/04/3 | Accepted: 2017/10/17 | Published: 2018/12/25
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
