Volume 10, Issue 1 (Vol. 10, No. 1 Spring 2016 2016)                   2016, 10(1): 3227-3244 | Back to browse issues page


XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Assessment of the GAP-SENSOR Use for Measuring Maximum Shear Modulus in Layered sandy and Gravelly Dacite Materials. Journal of Engineering Geology 2016; 10 (1) :3227-3244
URL: http://jeg.khu.ac.ir/article-1-2163-en.html
Abstract:   (6477 Views)

Among dynamic parameters, the maximum shear modulus and damping ratio of the materials has the great importance in the dynamic analyses. In this paper, the high frequency GAP-SENSORs (20 kHz) is used to measure shear wave velocity of the sandy and gravelly Dacite materials in the cyclic triaxial equipment. The test procedure is as follows: firstly, a weak impact on the top cap triaxial specimen is induced. The induced low horizontal and vertical displacements time histories (strain in the range 10-6) are recorded using data logger with rate of 100,000 samples per secent for each channel. Then by traveling time and distance between two GAP-SENSORs, wave velocity is measured. Finally, by calculating the poison ratio via horizontal and vertical strains, the maximum shear modulus of the material is calculated. The results indicate that the value of wave velocity is increased by increasing confining pressure, and their values are dependent on particle size. Also, using the reduced vibration amplitude technique at different levels of specimen, damping ratio value is calculated by temping method. By comparing the results of shear modulus and damping ratio using local measurement of axial strain (with GAP-SENSORs in the cyclic triaxial) at small strain level with the results of the proposed method, cofirmed the high precision of the innovative used method.

Full-Text [PDF 398 kb]   (3362 Downloads)    
Type of Study: Case-Study | Subject: En. Geology
Accepted: 2016/06/8 | Published: 2016/06/8

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Engineering Geology

Designed & Developed by : Yektaweb