Volume 14, Issue 3 (10-2014)
2014, 14(3): 171-182 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Azimaraghi M, Riazi S, Porteamor S. DC conduction processes in electron beam evaporated bromoaluminium phthalocyanine thin films. Journal title 2014; 14 (3) :171-182
URL: http://jsci.khu.ac.ir/article-1-1619-en.html
URL: http://jsci.khu.ac.ir/article-1-1619-en.html
Abstract: (6815 Views)
In the present study, we investigate DC conduction mechanism of electron beam evaporated Bromoaluminium phthalocyanine (BrAlPc) thin films using aluminum and gold electrodes. The current-voltage characteristics of sandwich type device are evaluated for the temperature range 298-413K under dark conditions. It is observed that the current passing through the device is increased by increasing temperature at the same voltage in the range of 0-6v. It is found that at lower voltages about 0 to 2v, the current–voltage characteristics demonstrate Ohmic behavior, while the space charge limited current (SCLC) becomes apparent at higher voltages about 2 to 6v, which is restricted by single discrete trapping level. We obtained more than one linear region in the temperature dependence of electrical conductivity. Also, the values of charge carrier mobility and the activation energy of device are evaluated.
Send email to the article author
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
