Journal of Engineering Geology

Mendeley  

Zotero  

Abdi M R, Safdari Seh Gonbad M. Studying the Effect of Roughness on Soil-Geotextile Interaction in Direct Shear Test. Journal of Engineering Geology 2018; 12 (5) :1-30
URL: http://jeg.khu.ac.ir/article-1-2733-en.html

One of the methods of increasing soil resistance against failure is soil reinforcement using geosynthetics. Soil-geosynthetic interactions are of great importance and are affected by friction and adhesion at their interface. Soil gradation, contact surface roughness and geotextile density are among the factors affecting soil-geotextiles interaction this study, to investigate the effects of these factors, large-scale direct shear tests have been conducted using a well and a poorly graded sand at a relative density of 80% reinforced with two geotextiles having different tensile strengths and mass per unit area. Samples were subjected to normal pressures of 12.5, 25 and 50kPa and sheared at a rate of 1 mm/min. Geotextile surface roughness was achieved by gluing two different single sized sand particles. Results show that increasing geotextile surface roughness increases shear strength at soil-geotextile interface. Geotextile tensile strength mobilization is shown to depend on soil grain size at the interface. The coarser and more angular the soil particles, the more effective the soil-reinforcement interactions. Geotextile tensile strength and its mass per unit area are shown to less important factors.